User's Manual

AMIC A9281-A-000 User Guide
© AMIC Dec. 2005 – All rights reserved p 4 of 17 Rev 1.0
4. Install A9281-A-000 Pocket PC Device Driver
To install A9281-A-000 Pocket PC device driver on your PDA, please follow the following
procedures:
1. Make sure that the required PDA synchronization software has been installed on
your PC.
2. Turn on your PC and wait for it to boot up completely.
3. Connect your PDA to your PC through PDA manufacturer recommended method.
(either through cradle, USB cable, or etc)
4. Establish communication between your PC and your PDA.
5. Put the device driver / GUI utility CD in your PC’s CD-ROM drive.
6. Use Windows Explorer to go to the Drivers & Utility directory on the CD-ROM.
7. Double click on elserialsetup_pocketpc.exe.
8. The Pocket PC installation screen will pop up as in the figure – 1.
Figure - 1
9. Click on Next button