User's Manual

AMIC A9281-A-000 User Guide
© AMIC Dec. 2005 – All rights reserved p 13 of 17 Rev 1.0
Write Page Data
Each RFID tag has user accessible memory pages. Typically each memory page
contains 16 bytes of data for tags complying with ISO-14443A standard. Please
refer to RFID tag manufacturer’s data sheet for details. AMIC’s A9281-A-000 CF
reader will write 4 bytes of data per block to RFID tags at a time. Please follow the
steps below for Write Page Data.
1. Single click on the Page box and input the desired memory page number to be
written by the reader (default value is 4). The range of the page number
available for user access depends on the tag itself. Please refer to RFID tag
manufacturer’s data sheet for details.
2. Single click on the Block Data box and input the desired data to be written on to
the tag.
3. Hold the PDA as close as possible to the tag.
4. Single click on Write Data button to write the specified tag’s memory block.
5. The data written to the tag should be displayed in the Response Information
box.
Figure – 9