User's Manual

AMIC A9281-A-000 User Guide
© AMIC Dec. 2005 – All rights reserved p 12 of 17 Rev 1.0
Read Page Data
Each RFID tag has user accessible memory blocks. Typically each memory page
contains 16 bytes of data for tags complying with ISO-14443A standard. Please
refer to RFID tag manufacturer’s data sheet for details. AMIC’s A9281-A-000 CF
reader will read 16 bytes of data per page from RFID tags at a time. Please follow
the steps below for Read Block Data.
1. Single click on the Page box, and input the desired memory page number to be
read by the reader (default value is 4). The range of the block number available
for user access depends on the tag itself. Please refer to RFID tag
manufacturer’s data sheet for details.
2. Hold the PDA at a reasonable distance from tag.
3. Single click on Read Data button to read the specified tag’s memory page.
4. The data read from the tag should be displayed in the Response Information box
If ErrCode=01 is displayed in the Response Information box, the CF reader did not
read the tag memory correctly. Please follow steps 1 through 3 again.
Figure – 8