User's Manual

AMIC A9281-A-000 User Guide
© AMIC Dec. 2005 – All rights reserved p 11 of 17 Rev 1.0
Read Card UID
Each RFID tag has an unique identification number (UID). You can use AMIC CF
reader to read UID from RFID tags. Make sure the GUI screen displays Init OK in
the System Status Dialog Box. To read UID from tags follow the steps listed below:
1. Hold the PDA at a reasonable distance from the tag. Reasonable distance
depends on the type of tag you are using. Generally speaking, the bigger the
size of the tag, the greater the distance.
2. Single click on ReadCardUID button to read tag’s UID
3. The UID from the tag just read should be displayed in the Response Information
box
4. If ErrorCode = 01 is displayed in the Response Information box, the CF reader
did not read the tag’s UID correctly. Please follow steps 1 through 3 again.
Figure – 7