User's Manual

AMIC A9281-A-000 User Guide

9 of 17

Rev 1.0

Figure - 6

9. If “Init Fail” is being displayed in the dialog box to the right of the COM port

setting, the PDA has failed to initialize the CF reader through the specified COM

port. This could be caused by several reasons: a) the CF reader is not

positioned correctly in the CF slot. b) COM port conflict has occurred. Please

use the correct COM port designated for the CF slot on the PDA. The available

COM port for CF reader is dependent on the type of PDA that you are using.

Note: You can use the supplied utility software, AmicCFUtility.exe, located in the

directory, Drivers & Utility, on the supplied CDROM to detect the appropriate