User's Manual

AMIC A9281-A-000 User Guide
© AMIC Dec. 2005 – All rights reserved p 8 of 17 Rev 1.0
Launch the GUI Utility on PDA
1. Make sure that the AMIC A9281-A-000 RFID CF reader is inserted into PDA’s
CF slot securely
2. “New Hardware Found” window will be displayed as in figure – 5
3. Use PDA’s stylus and single tap on “OK” button
4. Use PDA’s File Explorer to list application files available
5. Use PDA’s stylus and single tap on Rfid14443Dv1.0.exe
6. The following screen should be displayed
Figure - 5
7. AMIC A9281-A-000 RFID CF reader needs to be opened before any reader
functionality can be made available to its user. This can be done by single tap
on the “Init” button.
8. After applying single tap to the “Init” button, if the specified COM port is initialized
successfully, “Init OK” will be displayed to the box to the right of COM port setting.
At this time, the AM9281-A-000 CF reader is ready for user access.