User's Manual

AMIC A9280-B-000 User Guide
© AMIC Dec. 2004 – All rights reserved p 10 of 19 Rev 1.0
Read Card UID
Each RFID tag has an unique identification number (UID). You can use AMIC CF
reader to read UID from RFID tags. Make sure the GUI screen displays Init OK in
the System Status Dialog Box. To read UID from tags follow the steps listed below:
1. Hold the PDA such that the distance between the tag and the CF reader is no
longer than 7 cm.
2. Single click on ReadCardUID button to read tag’s UID
3. The Operation OK / Fail Display box on the lower right hand corner should
become green
4. The UID from the tag just read should be displayed in the Response Information
box
5. If ErrorCode = 02 is displayed in the Response Information box, the CF reader
did not read the tag’s UID correctly. Please follow steps 1 through 3 again.
Figure – 7