User's Manual

1. Introduction

Thank you for purchasing AMIC A9245-E-001 series UHF RFID readers.

A9245-E-001 series UHF RFID reader family consist of two reader models,

A9245-E-001-232 and A9245-E-001-485. Both A9245-E-001-232 and

A9245-E-001-485 UHF RFID readers are designed to compliant with EPC Global

Gen2 specifications. They are easy to use and require only simple installations.

These readers are equipped with either RS-232 or RS-485 host interface, and come

standard with Wiegand 26/34 and GPIO for external device controls.

2. Product Contents

Before starting using the a9245-E-001 RFID reader, first please check that the

package contains the following items:

 One A9245-E-001 UHF RFID reader.

 One CD-ROM containing Demo Utility Software.

 One CD-ROM containing SDK library.

 One 110/240 VAC to +5VDC power supply. Different types of power supplied

might be used for different countries / regions.

 One RS-232 cable (for A9245-E-001-232 model only)

 Two cables with circular 10-pin connector at one end and flying leads at other end

for RS-485 and GPIO ports.

 DC Power cable

Note:

A9245-E-001 UHF reader series has integrated antenna. User should not

attempt to disassemble the antenna from the reader unit as that might cause damage to

the reader unit, void product warranty, and violate local government regulation.