User's Manual

A9240-A-001-485 User Manual
4.4 Software Description
4.4.1 Starting and Quitting
1. Select
Program / AMICWare RFID Expert Software/AMICRFID
from the Windows
. The AMICWare RFID Expert Software will start and the GUI screen will be displayed.
Start Menu.
2
3. To quit, select
Exit
to close the AMICWare RFID Expert Software.
Default Setting :
The following is software’s default setting when installed on your computer:
COM Port: COM1
Baud Rate: 115.2 kbits/sec, No parity bit, 8 data bits, 1 stop bit
User must change the above setting to reflect the actual PC hardware environment in order
to establish proper communication with the AMIC reader system.
© AMIC All rights reserved Page22 of 34 AMIC Proprietary / Confidential Rev 1.0