User's Manual

AMICWare RFID Expert Software
Ver. 1.0F
23
※
Setting sector number that you want to operate, then press Verify Key to authentication.
※ If authentication is passed, the grayed-out buttons will be enable.
※ Secret keys A and B will be save to PC file whenever the Save Key to Backup File Button is
pressed.
※
The secret keys A and (or) B will be changed to Mifare S50/S70 IC whenever the Change
Key Button is pressed
Note : Mifare S50/S70 secret keys A and B has 48 bits and default value of 0xFFFFFFFFFFFF.
Note : Mifare S50/S70 access condition has 32 bits and default value of 0xFF078069.
Mifare S50/S70 Value Blocks Operation
※ If authentication is passed (shown above), the Read button will be enable and the reading
of e-Purse value will be allowed. After Read is finished, the other grayed-out buttons will be
enabled. Select the function to be performed next
Ultralight Data Page Operation
※ Select the page that you want to read. Press the Read button. Page data will be