System information

Section 3 – Operator Screens
21822706 35
2.6.6 Configure Server – Broadband
The Configure Server – Broadband screen
provides settings for server connection parameters
on broadband-connected jukeboxes.
If the jukebox has a modem installed, a choice of either Broadband or Dial-Up Server Connection type is displayed. If a
modem is not installed, the Dial-Up button will not be displayed. See the next page for a description of dial-up configuration
options.
Enter server settings by touching the text box for Server URL and Agent Name separately. A keyboard pops up to enter the
proper data for each field as it is selected. Touch Update on the keyboard to set the new text into the text box, or Cancel to
close the keyboard without changing a nything.
Next, touch the Test Connection button to perform a quick test confirming the jukebox can connect to AMI’s server
(“Server Found”), and authenticate a connection with AMI’s server (“Connected”). If the connection is successful, you will
see “Yes” next to “Server Found” and “Connected”. If the connection fails, you will see “No”. If the connection fails, check
the settings on the Network Information screen (Diagnostics –> Network Information). This screen will allow you to check
the IP Configuration and run LAN and WAN tests.
Touch the Save button to save your changes.
Touch the Cancel button to undo your changes and exit the screen.