Owner`s manual

COPYRIGHT © 2010 AMI ENTERTAINMENT NETWORK, INC.
MEGATOUCH ION AURORA OWNER’S MANUAL PM0636-14
Broadband Connection Instructions for Games on the
Subscription Model
Aurora games on the Broadband Subscription Model are required to connect to a broad-
band Internet connection for game and credit card reader functionality. Follow the instruc-
tions below to connect your game.
To enable this feature, you will need a broadband Internet connection, a router (The
Linksys 802.11G router is recommended) and Ethernet cable(s) (if you aren’t using wire-
less). It is recommended that you set up and configure your router prior to connecting the
unit. Once the router is set up, follow the instructions below.
5
connection type to connect to the
Internet, touch YES. The game will then
scan for available networks. To se-
lect a network from the list, touch it
and then touch NEXT. If your network
does not appear in the list, touch
MANUAL CONNECTION, enter the
SSID (network name) of the network
you want to connect to and then touch
ENTER. If your network has a secu-
rity key (password), enter it and touch
ENTER. If you have not set a pass-
word, simply touch NEXT. Continue
with step 5.
4. Wired connections only: Touch
WIRED ETHERNET. Then, touch WIRED
ETHERNET NETWORK. If the game
asks you if you are using this connec-
tion type to connect to the Internet,
touch YES. Continue with step 5.
5. On the next screen, simply touch AC-
CEPT SETTINGS AND CONNECT to
accept the default settings. If you wish
to change the settings, touch MODIFY
SETTINGS and use the SET or
MANUAL buttons to enter the new
settings. For help with any of the set-
tings, touch the ? buttons on screen.
After you have entered in your new
settings, touch DONE and then touch
ACCEPT SETTINGS
AND CONNECT.
Hardware:
1. Wired connections: Turn off and
unplug the unit and connect an Ethernet
cable to the Ethernet coupler. Connect
the other end of the cable to the exter-
nal router. Plug in and turn on the unit.
2. Wireless connections: Plug in and
turn on the unit. NOTE: If you are
using security, only 64 or 128-bit
WEP encryption is supported.
NOTE: When you first turn on an game
on the Broadband Subscription
Model, it will display a message indi-
cating it is out of service. Your game
must call into the server in order for it
to function.
Software:
1. Press the SETUP button.
2 Touch the Network button and then
CONNECTION WIZARD. If prompted,
select your time zone and touch NEXT.
3. Wireless connections only: Touch
WIRELESS ETHERNET. You’ll be
prompted to choose your connection
method.
• If you want to connect to an AMI router,
touch AUTO-CONNECT TO AMI
ROUTER and continue with step 5.
• If you want to connect to a non-AMI
router, touch OTHER WIRELESS
ROUTER OR ACCESS POINT. If the
game asks you if you are using this
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200