Owner`s manual

PM0636-14 MEGATOUCH ION AURORA OWNER’S MANUAL

Connection Wizard (Ion Games Only)

NOTE: In order to establish any network connection (Internet, game-to-game, or jukebox),

you must enter and complete the Connection Wizard. Additionally, since you can be con-

nected to each network in a separate way, you must complete the Connection Wizard for each

connection you wish to establish, be it wired, wireless or dial-up.

IMPORTANT!! If using two different connection methods (e.g. Wireless, Wired, Dial-Up) to both

connect game-to-game and to the Internet, you MUST configure game-to-game first.

1. Press the SETUP button.

2. Touch the Network button and then CONNECTION WIZARD. If prompted, select your

time zone and touch NEXT.

3. Touch the connection method you want to use:

Wireless Ethernet

This should be used if you are using a wireless router:

• to connect to the Internet

• to wirelessly link Megatouch games. (Note: You will have to perform these steps on

both games in order for them to link.) For a more reliable wireless game-to-game

connection, it is recommended that you use a router to connect games.

• to wirelessly link a Megatouch and a wireless AMI router in the same location

Touch WIRELESS ETHERNET and continue with step 4.

NOTE: If you are using wireless security, only 64 or 128-bit WEP encryption is supported.

Wired Ethernet

Use this if you are connecting an Ethernet cable between the Megatouch and:

• the Internet

• a router

• another Megatouch game or non-AMI jukebox (Note: If you are connecting two games

you will have to perform these steps on both games in order for them to link.)

Touch WIRED ETHERNET and continue with step 5.

Dial-Up

This can only be used to connect to the Internet. A modem must be installed in your game

in order to connect via dial-up. Touch DIAL-UP and continue with step 6.

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200