Owner`s manual

COPYRIGHT © 2010 AMI ENTERTAINMENT NETWORK, INC.
PM0636-14 MEGATOUCH ION AURORA OWNER’S MANUAL
Diagnostics Menu
FIGURE 15 - DIAGNOSTICS MENU
Video Test
Touch the screen to cycle through a series of video test screens.
I/O Test
Tests the SETUP and CALIBRATE buttons, all coin channels, the coin
meter, and the coin lockout feature (if applicable). A green light next to the
appropriate button will register each time that item is tested, and the
number next to the item should increment by one with each test. The
screen also displays which DIP switches are on or off.
Touchscreen
Calibration
Follow the on-screen instructions to calibrate the touchscreen.
Touchscreen
Test
Allows you to check the touchscreen calibration accuracy. The crosshairs
should follow your finger when you move it across the screen.
Checksum
Test
Checks the hard drive for missing or corrupted files. With STOP ON
ERROR? set to YES, a message indicating which file is corrupted will be
shown whenever the game encounters an error. With STOP ON ERROR?
set to NO, a list of corrupted files will be displayed when the test is
complete. If errors are detected, the software on the drive may need to be
reloaded. If this does not solve the problem, the drive may require
replacement. The test could take up to 30 minutes.
System Info
Gives details about the following:
• platform type
• processor type and speed
• motherboard type
• amount of memory
• Ethernet card manufacturer
• sound chip type
• video chip type
• touchscreen manufacturer
• hard drive manufacturer/size
• modem identification number
• fan speed
• status
• PSOC version
• I/O board processor
• monitor
• wireless network
Verify
Databases
Only use on the advice of Technical Service. An Update from Server must
be performed prior to verifying databases.
Hard Drive Self
Diagnostics
Checks the hard drive for errors, displays results, and notifies the operator
when an error is detected or a hard drive failure is imminent. Tests can be
initiated automatically and/or manually.
Joystick
Calibration
Follow the on-screen instructions to calibrate the joystick.
Joystick Test
Allows you to check the joystick calibration accuracy. The crosshairs
should follow the movement of the joystick.
View System
Log
Displays a log of all operations performed by the game since the log was
last cleared. This information is helpful for customer service in
troubleshooting your game.
22
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200