Service manual

S-4000 ISBH+I Omron
Revised 11/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
1-59
4. MACHINE LUBRICATION
1. It is necessary to lubricate the places shown below before the machine is switched on for the first time
or after a long idle period. Use oil ESSO TERESSO 32 or similar quality.
2. The amount of oil in the reservoir ➊ is indicated by the red mark. Too much oil may cause its
overflowing from the base area.
3. The reservoir is fitted through the hole ➋ in front of the gage.
4. The points for lubrication of the needle bar mechanism ➌ and draw-off mechanism ➍ are shown in
the illustration below (after opening the needle bar cover ➎). Lubricate the main cam worm gear
through the hole ➏. Lubricate all of these points every 8 hours.
G - MACHINE MAINTENANCE