Service manual

S-4000 ISBH+I Omron
Revised 11/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
1-55
Warning: - Check for damage to electrical cables
- Check safety covers for damage and replace if needed immediately
- Keep your hands out of the sewing area
- Do not modify the machine in any way, which could eliminate safety parts
- Do not attach external lights or other devices to the machine´s electrical system
Caution: - Do not neglect periodic maintenance.
- If you have fault in electrical power supply, switch off the operating switch (circuit
breaker).
- Do not damage, correct and remove safety labels.
- Do not work with the machine when you are under the influence of the drugs or
alcohol.
- User has to ensure the lighting of the working area minimal 750 Luxes.
1. MACHINE CLEANING AND MAINTENANCE
G - MACHINE MAINTENANCE
1. Switch the power off and disconnect
airsupply.
2. For cleaning and oiling, remove the
cover ➊ and take out the clamp feet
mechainsm ➋.
Clean the clamping area from the
fabric and thread lints.
3. Open the needle bar cover ➌ and
clean the thread lints from the
guides Í and thread tension ➎.
4. Clean the thread lints and fabric from
the sewing area - throat plate, loopers.
5. Lubricate the machine according to
the section G 4.