Service manual

S-4000 ISBH+I Omron
Revised 12/2008
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
1-27
3. THE PRINCIPLES FOR THE MACHINE ADJUSTMENT
1. Before making mechanical adjustment turn the machine to the service mode by pressing the
button EMERGENCY STOP.
CAUTION: It is not possible to start sewing by pressing the foot pedal when working in Service Mode.
3. If it is necessary to tilt the machine on the rest pin ➏ during the machine adjustment, follow the
below mentioned steps:
a) disconnect the air tubes ➌ from regulator
b) disconnect the air tubes ➍ from the cylinders of the indexer clamp feet and from the thread
puller
c) remove the indexer clamp feet ➎.
E - MACHINE ADJUSTMENTS
Servis mode