Service manual

S-4000 ISBH+I Omron
Revised 12/2008
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
1-13
C - PROPER APPLICATION
1. POWER UP / HOME POSITION
1.1. Turn the main power switch on ➊ by turning clockwise to the I position.
1.2. The machine is ready for operation when the control panel display lights, the Ready message appears
on the display and the green LED lights.
1.3. The machine must be in the home position before starting to sew (to be certain, press the foot treadle
and sew one dummy buttonhole).
1.4. The power voltage control (Voltage monitoring relay HRN 35) is installed in the machine control
system. This power voltage control cautions a machine operator if the supply voltage is not in the
required range (185V - 255V) and the machine could be damaged - see section E19.
On
RUN
On