Service manual

S-4000 ISBH+I Omron
Revised 12/2008
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
1-8
B - MACHINE ASSEMBLY
1. CONTENT OF THE SHIPPING BOX
1. The shipment contains one box.
2. There is a carton with accessories, service manual with
parts section and thread stand ➊ in the box.
3. During unpacking the shipment, follow the labels which are on
a cover.
CAUTION: If the machine or crate was damaged in shipment inform
the freight company immediately. Check the contents of the crate
immediately and report any damage or missing items to the
manufacturer immediately, late reports will not be considered.
2. ACCESSORIES
A package of accessories is supplied with this machine,
please refer to page 3-69 for detailed descriptions.
The height of the working area is standardly set in range
830 - 850 mm from the manufacturer. When using this
height of the working area, recommended height of the
operator seat is in range 430 - 460 mm. The height of the
table can be set in range 670 - 880 mm by screws ➌.
Remove the shipping strap ➋ after unpacking the machine,
the use of this strap is recommended anytime the machine
is transported.
➊