Service manual

S-4000 ISBH+I Omron
Revised 03/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
1-7
Sewing cam
- it is possible to sew a different buttonhole shape ➊, ➌ than standard
buttonhole ➋ is
- a cutomer can order it - ➊ part number 24.3079.0.000
- ➌ part number 24.3080.0.000
- to change a cam - see section E20
Needles 750 SC 80/12, 70/10
- the manufacturer recommends to use these needles when sewing
the thin materials
- part number 02.0750.2.100 (80/12), 02.0750.2.109 (70/10)
Connector ∅ 8 ➊
- order it if the connecting tube has the inner
diameter 8 mm. The connector ∅ 10 is
supplied with the machine.
- part number is 12.0008.3.607
Pneumatic Adapater ➋
- order it if using 1/8“ NPT
- part number 12.0008.3.081
Hand valve ➌
- to dissipate any air from the machine, order it (air
circuit is bled). It is necessary to order the
connectors (see below) to the hand valve for connection to the air tubes.
- part number 12.0008.3.463
Connectors
➍ 12.0008.3.464 ∅ 8
for connection to the tube with inner ∅ 8 mm
➎ 12.0008.3.466 ∅ 10
for connection to the tube with inner ∅ 10 mm
➏ 12.0008.3.467 ∅ 12
for connection to the tube with inner ∅ 12 mm*
➐ 12.0008.3.465 ∅ 16
for connection to the tube with inner ∅ 16 mm*
* To connect the tube with inner ∅ 12 and ∅ 16,
it is also necessary to order ∅ 10
A - INTRODUCTION
6. SPECIAL ACCESSORIES
- machine device, which is not included in the standard equipment of the machine and a customer
can order it



Ê
Ë
Ì
Í
Î
Ï
Ð
Laser light kit
➑ 03.5519.0.022
➑