Service manual

S-4000 ISBH+I Omron
Revised 03/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
1-6
A - INTRODUCTION
CAUTION: LASER RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
Read carefully the supplemental rules described below before setting up
laser system.
C.C. E.A. laser product has been designed and manufactured specifically
for the work place and for use in working, conditions.
It complies to the existing work safety regulation included in directive 73/23 and subsequent 93/68.
It has been made following to the International Standart CE/EN 60825.
Use C.C.E.A. laser system belong Class II. To this class emit low-power beam =/< lmW to be seen into the visible
spectrum. They are not considered dangerous if just the laser beam will be accidentally (fraction of second) pointed at
the eyes. The palpebral
reflection would not allow a length of exposure higher than 0,25 seconds. It is absolutely necessary wearing
specific safety glases (with declared wavelength and filter), when eyes are directly and lasting exposed at the laser
radiation.
Our Lasers are followings: 650 nm.
LABELLING:
The label showing the laser class must bepermanently attached so as to be clearly visible and readable when the
system is working, for maintenance and other needs. Labels must be see without a direct exposure at the laser
radiation.