Service manual
S-4000 ISBH+I Omron
Revised 12/2008
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
1-4
A - INTRODUCTION
4. SPECIFICATIONS
Machine type S 4000 ISBH+I
Description
electronic controller chains stitch straight buttonhole machine for sewing
imitation buttonholes on cuff Wiggins. With the automatic indexer, preset
programs automatically control the sewing of multiple buttonholes either
straight or on an angle
Sewing speed 1500-3800 stitches/min (500 - 1900 rev/min of the drive shaft)
Buttonhole length 15.8 - 25 mm (5/8" - 1")
Stitch density 3 - 12 stitches/cm (8 - 35 spi)
Type of the buttonhole single thread chain stitch without center cutting
Machine clamp foot height 12.7 mm (1/2")
Maximum work thickness to 3 mm (1/8")
Bite range 1.7 - 2.3 (1/15" - 3/32")
Distance between the first
and the second row of
stitches
0 - 0.9 mm
Indexer number of
buttonholes
1 — 8
Distance between
buttonholes
4 — 63 mm
Indexer clamp feet angle
sewing
0° — 6°
Recommended thread thread size 80, 100, 120
Needle system Needle 750 SC 90/14 (it is possible to order 80/12; 70/10)
Lubrication semi-automatic
Operating Conditions
according to IEC 364-3, IEC 364-5-51 temperature from +5°C to 40°C,
relative air humidity from 30 to 80 %
Air pressure 0.55 MPa (80 PSI) Indexer 0,4 Mpa (58 PSI)
Machine db level Laeg = 74dB; LWA = 87dB; LpC, peak = 103dB
Machine head dimension 340 mm (height) x 470 (width) x 250 mm (length)
Machine head weight 62 kg
Table Dimension 700 mm (height) x 600 mm (width) x 1100 mm (length)
1NPE~60Hz 230V/TN-S (according to EN 60204-1)
1NPE~50Hz 230V/TN-S (according to EN 60204-1)
10A characteristic C (according to EN 60947-2)
16A characteristic B (according to EN 60947-2)
Max. indexer feeding 63 mm
Indexer dimension 114 mm (height) x 400 mm (width) x 383 mm (length)
Electrical Requirements
Line Circuit Breaker