Service manual

S-4000 CAED Omron
1-49
Revised 10/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
F - MACHINE MAINTENANCE
5. DISPOSAL MEASURES
1. To ensure correct disposal of the machine following environmental measures, it is important to remove
non-metal parts from the machine. Once such parts are taken out, it is necessary to partially dismantle
the machine; remove covers, disassemble the machine arm and take it out of the frame.
2. Aluminum and hard aluminum parts, non-ferrous metal parts and plastic parts must be disposed
separately.
3. Parts described in ad 2 are marked in the spare parts manual as follows:
● aluminum parts
●● non-ferrous metal parts
●●● plastic and non metal alloys
Note.: parts assemblies containing aluminum parts, non-ferrous metal parts, steel parts and plastic
parts must be dismantled first and then sorted into groups (●, ●●, ●●●).