Service manual

S-4000 BH Omron
1-53
Released 05/2010
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone]; Fax: [phone]
ÊÊ
ÊÊ
Ê
ËË
Ë
Ë
Ë
ÌÌ
ÌÌ
Ì
ÎÎ
ÎÎ
Î
ÍÍ
Í
Í
Í
ÍÍ
ÍÍ
Í
Warning: - Check for damage to electrical cables
- Check safety covers for damage and replace if needed immediately
- Keep your hands out of the sewing area
- Do not modify the machine in any way, which could eliminate safety parts
- Do not attach external lights or other devices to the machine·s electrical system
Caution: - Do not neglect periodic maintenance.
- If you have fault in electrical power supply, switch off the operating switch (circuit breaker).
- Do not damage, correct and remove safety labels.
- Do not work with the machine when you are under the influence of the drugs or alcohol.
- User has to ensure the lighting of the working area minimal 750 Luxes.
1. MACHINE CLEANING AND MAINTENANCE
1. Switch the power off and disconnect air supply.
2. For cleaning and oiling, remove the cover ➊ and take out the clamp feet mechainsm ➋. Clean the
clamping area from the fabric and thread lints.
3. Open the needle bar cover ➌ and clean the thread lints from the guides ➍ and thread tension ➎.
4. Using the air flow, clean the thread lints and fabric from the sewing area - throat plate, loopers.
5. Lubricate the machine according to the section G 4.
1. MACHINE CLEANING AND MAINTENANCE
1. Switch the power off and disconnect air
supply.
2. For cleaning and oiling, remove the cover ➊
and take out the clamp feet mechainsm ➋.
Clean the clamping area from the fabric and
thread lints.
3. Open the needle bar cover ➌ and clean the
thread lints from the guides ➍ and thread
tension ➎.
4. Using the air flow, clean the thread lints and
fabric from the sewing area - throat plate, loopers.
5. Lubricate the machine according to the section
G 4.
E - MACHINE ADJUSTMENTS