Service manual

S-4000 BH Omron
1-42
Released 05/2010
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone]; Fax: [phone]
E - MACHINE ADJUSTMENTS
12. THE CUTTING SPACE SETTING
1. Tilt the sewing head onto the rest pin.
2. Loosen the nut ➊ and move the stud ➋ to the required position (to the right - cutting space ➌
decreases, to the left - space increases). The cutting space can be adjusted in range 0 - 0.9 mm.
3. Sew a buttonhole on scrap fabric to check setting.
ÌÌ
Ì
Ì
Ì