Service manual

S-4000 BH Omron
1-24
Released 05/2010
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone]; Fax: [phone]
D - MACHINE CONTROLS
10.
Cycle delay
(500-2500 ms)
500
- setting the delay between the sewing cycles. Cycling parameter must be
activated. Range 500-2500 ms.
11.
Cycling
(yes/no)
no
- activation of the machine cycling. It is possible to set Yes / No.
12.
Pedal
(1step/2steps)
2steps
- setting the foot pedal position to start sewing repeating. Possible setting
1 step / 2 steps .
13.
Double sew
(1, 2=1 or 2, 3=2)
1
- setting the number of buttonhole sewing repeat. It is possible to set 1 / 2
/ 3 = 1 or 2. If the value „2“ is set one performs double sewing by
holding the pedal during sewing.
14.
Lcount
1239
Count Rst
No
- life counter
15.
Lcount
Count Rst
Yes
1239
- daily counter reset - set „Yes“ for reset
To return to the main screen, press key
Ready
1239
.
Display
4.1. Fast entry to the most widely used parameters
- setting the maximum speed.
Range 1000 - 3800 spm.
- setting the number of buttonhole sewing repeating
Range 1, 2 = 1 or 2, 3 = 2.
- life counter
Step back home position
Press F3 to Rst
Counter: 4538
Double sew
(1, 2=1 or 2, 3=2)
1