Service manual
Table Of Contents
- MODEL S 105
- LIMITED WARRANTY ON NEW AMF REECE EQUIPMENT
- WARRANTY REGISTRATION CARD
- TABLE OF CONTENTS
- A-INTRODUCTION
- B-MACHINE INSTALATION
- C-CORRECT USAGE
- 1.SEWING A BUTTONHOLE
- 2.NEEDLE EXCHANGE
- 3.THREADING THE MACHINE
- 4.PRINCIPLES OF SEWING
- 5.MACHINE DESCRIPTION AND ITS FUNCTIONS
- 6.CHANGING SEAMING WIDTH
- 7.STITCH DENSITY ADJUSTMENT
- 8.STITCHING LENGHT AND FLYBAR ADJUSTMENT
- 9.CHANGING THE POSITION IF STITCH ROWS-GAPS FOR CUT
- 10-SETTING THE SPREAD OF CLAMP FEET
- D-MACHINE ADJUSTMENT
- 1.TABLE ADJUSTMENT
- 2.STOPPING MECHANISM
- 3.BRAKE ADJUSTMENT
- 4.NEEDLE BAR AND RACE ALIGNMENT
- 5.BUTTONHOLE SHAPE ADJUSTMENT
- 6.NEEDLE BAR HEIGHT
- 7.LOOPERS ADJUSTMENT
- 8.SPREADERS ADJUSTMENT
- 9.UPPER THREAD TRIMMING
- 10.UPPER THREAD TENSION
- 11.SEWING SWITCH LEVER
- 12.CUTTING MECHANISM ADJUSTMENT
- 13.ADJUSTMENT OF CLAMPING MECHANISM
- E-MAINTENANCE
- TROUBLESHOOTING
Released 01/2010
E-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
S-105
1-19
C - CORRECT USAGE
S-105 machine manufactured by AMF Reece sews with a two-thread chain buttonhole stitch with the
possibility to use gimp
Ì
Ì
ÌÌ
Ì. The principle of a chain stitch is weaving two so called endless threads, upper
thread
ÊÊ
ÊÊ
Ê and lower thread
ËË
ËË
Ë, that enables sewing applications without the necessity to refill the supply of
lower thread – as it is usual when sewing lockstitches.
4. PRINCIPLES OF SEWING
Ê
Ì
Ë
On a regular basis, gimp is inserted into the face side of the work piece (on the seam side – bottom side -
of the work piece when sewing onto the machine).
Gimp - creates plastic look of a buttonhole and together with a bottom thread
decorative stitch prov
ides the shape and firmness of a buttonhole.
Decorative stitch – creates plastic shape nearer the cut. The upper thread
makes a covering stitching on the upper side of the fabric.