Service manual

Released: 10/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
E - STANDARD MACHINE
3.5. Check the machine for further lubrication. Pour 1-2 drops into each place marked with red color. Pay your
attention especially for sewing cam, feeding mechanism, side needle bite, drive shaft, cutting lever case and other
moving parts.
3.6. Make at least 10 buttonholes on a scrap piece of material after lubrication to eliminate the possibility of making
oil stains on a workpiece; wipe off visible remains of oil.
3.7. Put all removed parts back onto the machine, secure the clamping plates.
1-50
S-101.M