Service manual

0,8 m m
D - MACHINE ADJUSTMENT
Released: 10/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
14.5. Adjustment of safety latch – turn the left wheel. Once the machine is in the home position and feet levers
release, the safety latch
16
should be above the groove placed on the tip of the square
15
. To make adjustment,
loosen screws
17
and move the support
19
upwards or downwards as necessary so that the latch
16
drops into the
groove. Once the adjustment is done, tighten the screws
17
. The minimal play required between the lever and the tip
of the clamping arm is 0,8 mm. To adjust it, loosen the screw
17
and turn the eccentric nut as needed
18
. Tighten the
screws after the adjustment.
S-101.M
1-44