Service manual

Released: 10/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
D - MACHINE ADJUSTMENT
WARNING!
The holder
12
of the pins
4
is at the manufacturer tted by wedges and ned with a pin. Do not change the position
of wedges. Switching over the pins can be adjusted after turning the cam in to the position when the roll
2
is in the
position
9
of cam travel
3
. The pin
4
should leave the groove
5
in the cam at this point. If not, adjust the bracket
10
as needed once you loos the screen
11
.
S-101.M
1-27