Service manual

Released: 10/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
B - MACHINE INSTALLATION
3. THREAD STAND INSTALLATION
3.1. Put the thread stad together according to the drawing
3.2. Position of the locking ring
1
allows assembly of the thread stand for various thicknes of table top. Threaded
end of the post
6
must not extend more than 1 mm (1/32“) through the locking nut
5
.
3.3. Insert the washer
2
and the post into the
hole provided in the right rear of the table top
3
.
Insert the washer
4
and tighten the nut
5
.
1-10
S-101.M