Service manual

A - INTRODUCTION
Released: 10/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
DANGER !
• Before connecting the machine with the power, make sure all covers are mantled onto the machine.
• If any of the safety covers needs to be dismantled, turn the main switch off, and possibly unplug the power from
the socket.
• Do not connect the machine with the power if any of the covers is dismantled.
• Once the machine is connected with the power, check the rotation of the pulley.
CAUTION !
• Remember the position of the switch so that you can use it from any position.
• Make sure that the power, its dimension and circuit breaker provides constant power supply to ensure reliable
performance of the machine.
• Check that none of the cables is damaged in order to prevent accident injury from happening by touching them.
• Damaged covers must be immediately repaired or replaced with new ones.
• Never touch rotating parts.
• Never put ngers into the sewing area.
• Turn the main switch off before you change a needle.
• Unplug the power cord from the socket before you clean or maintain the machine.
• If you do not work on the machine, disconnect the power with the main switch.
• Do not make any modications in the machine that would endanger its safety.
• Be aware that every machine part can become dangerous if they are not handled or serviced the right way. It is
important that everybody working with the machine – operate it or do the maintenance on it – gets acquainted
with information in this instruction book and in the spare parts manual.
WARNING !
• Keep maintaining the machine regularly as described in the manual.
• If the power is cut off, turn the main switch off.
• Do not paint, do not damage, do not remove or change the safety labels. Keep them clean. If they are not legible
or you loose them, order new ones at our company and place it onto their original location.
• Bind your long hair – it can be caught and winded by the driving mechanism.
• Buttons (hooks) on your sleeves must be buttoned up so that loose parts of your outt are not winded into the
driving mechanism.
• Do not work onto the machine impaired or intoxicated.
• If you are unsure of the operation process, call up a serviceman.
• The machine user must provide for illuminating the working area – minimum 750 Lux.
S-101.M
1-7