Service manual

A - INTRODUCTION
Released: 10/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
5. TECHNICAL CONDITIONS
S-101.M
Mechanical eyelet buttonhole machine with chain stitch can be used on men and ladies’ garments. Gimp can be also
used. With a simple change, the following types of buttonholes can be sewn:
- ybar - without bar
- with eye - with eye
- without eye - without eye
NOTICE!
If you use threads 100 thick or less, the manufacturer recommend using the left looper order number 11.4005.0.005
13 - 32 mm (1/2”-1 1/4”)
Cut before (CB),
Cut after (CA)
No eye; 2,7x 4,3 mm
40 mm
02.0501.0.111 (Nm 90, 100, 110)
89 kg (152 lbs)
158 kg
230 V 50/60 Hz 3 Ph
400 V 50/60 Hz 3 Ph
230 V 50/60 Hz 1 Ph
110 V 60 Hz 1 Ph
3 - 16 st/cm
2 ...4 mm
10 mm
Description
Parameters
3,0 to 7,0 mm
- 0,50 to + 1,8 mm
70, 100, 120,
gimp 11{120.
800 mm (height)
x 640 mm (width)
x 790 mm (depth)
750 mm (height)
x 1100 mm (width)
x 700 mm (depth)
According to IEC 364-3, IEC 364-5-51 temperature from +5°C to 40°C, relative air humidity from 30 to 80%
Up to 1900 spm
Sewing speed
Stitch density
Buttonhole types
Eye types
Fly bar lenght
Maximum clamp height
Maximum work thickness
Buttonhole cutting mode
Cutting space
Bedplate movement
Needle system
Recomended thread*
Operating condition
Machine db level
Machine head dimension
Machine head weight
Table dimension
Machine weight
Electrical requirements
Stitch bite
Buttonhole
lenght
Stitch type
401 two thread chainstitch
4 to 12
to 6 mm
Yes
Max. 80 dB/ stoping 82 dB
S-101.M
1-5