Service manual

1-68
S100
Revised 10/2005
e-mail: [e-mail] ; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
G - MACHINE MAINTENANCE
WARNING ! - Check the electrical cables for damage.
- Check if the safety covers are in good condition. Replace damaged covers!
- Keep your hands out from the needle space!
- Do not modify the machine in any way, which can eliminate its safety parts.
CAUTION ! - Do not neglect periodic maintenance.
- If there is any fault in electrical power supply, switch off the operating switch (circuit
breaker).
- Do not damage, correct and remove safety labels.
- Do not work with the machine when you are under the influence of drugs or
alcohol.
- User has to ensure that the lighting of the working area is minimal 750 Luxes.
1. CLEANING AND MAINTENANCE THE MACHINE
1. Switch the power off and disconnect the
air supply.
2. For cleaning and maintenance, remove the
clamp fees  to access to the sewing
mechanism. Then open the rear cover  .
3. Clean the thread lints and fabric from the
sewing area, guides and thread tension. To
move with the sewing mechanism, turn the
hand wheel . It is also possible to raise
the machine head, to the locked position.








