Service manual

S100
1-1
Revised 10/2005
e-mail: [e-mail] ; [e-mail] ; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
A - INTRODUCTION
1. INTRODUCTION
The S100-030/031/032 (AF-CB/CA-RE) is a versatile two thread chain stitch sewing machine for
sewing buttonholes with possibility to insert the gimp. The regular eye, Cut Before / Cut After, adjustable
flybar machine may be used for suits, jeans and a wide variety of sewing applications.
The S 100-052/053 (RE) is two threads, pertinently one thread machine, which is sewing round chain
stitch buttonhole. It is used for sewing decorative buttonholes, for example on the hoods or hats.
The S 100-060 (CRB) is two threads machine with chain stitch and opportunity insert the gimp for
sewing buttonholes with cross bar and flybar. It allows sewing by one chain thread stitch, which is suitable
for smaller highlighting of the stitches above the fabric (smaller plasticity).
The size of the buttonhole (with eye or without eye) and type of the buttonhole end (open end, flybar or
cross bar) are ensured by changeable cams.
The semiautomatic lubrication system uses drip oil wicks to lubricate the critical machine areas.
To prevent machine damage, it is possible to check the level of oil in the visibly placed oil sight gauge .
Machine models:
S100 - 030 /031/032 AF-CB/CA-RE
S100 - 030 for standard sewing
S100 - 031 for jeans sewing
S100 - 032 for textilie sewing
S100 - 052 RE (Small eye)
S100 - 053 RE (Large eye)
S100 - 060 CRB
Note:
AF - Adjustable Flybar
CB - Cutting Before
CA - Cutting After
CRB - Cross Bar
RE - Round Eye
All these machines have cut upper thread mechanisms.