Service manual

1-52

S100

Revised 10/2005

e-mail: service@amfreece.cz ; parts@amfreece.cz; website: www.amfreece.com

Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606

D - MACHINE ADJUSTMENT

23. CUTTING SPACE MODIFICATION

Change of the stitches rows position, increase or decrease the cutting space, it is used especially when the

cutting before is changing to the cutting after.

1. Loosen the nut .

2. Turn the eccentric  clockwise for the more cutting space, as illustrated in example 2 of anti-

clockwise for less cutting space, as illustrated in example 1.

3. Tighten the nut .

Note: When the change of the cutting space is performed, it can be necessary to do loopers adjustment,

or upper thread trim knife adjustment.







