Service manual

S100
1-41
Revised 10/2005
e-mail: [e-mail] ; [e-mail] ; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
15. EYE SHAPE CONTROL
1. Install the throat plate.
2. Insert the prick-in needle  02.0001.0.000 into the needle bar.
The depth of the needle into the needle bar must allow the point
of the needle to just barely penetrate a piece of paper.
3. Place a piece of paper across the clamp area of the bedplate to check
needle penetration.
4. Switch on the motor power.
5. Sew the sample and check regularity of the eye shape sewing.
Remove appropriate faults according to the previous sections.
D - MACHINE ADJUSTMENT
14. LENGTH SETTING-UP OF THE SECOND BUTTONHOLE ROW
1. Loosen the locking nut  and rotate the adjustable screw  for the correct last stitch stop location.
2. Rotating the screw in, the second row of stitches will be shorten, rotating the screw out, the second
row of stitches will be longer.
Stitch Examples
Locing nu
Adjsting
screw
Shorter Even Longer
1
2
1
2








