Manualshelf

Service manual

ManualsBrandsAMF ManualsBusiness equipmentS-100
21222324252627282930
1-24
S100
Revised 10/2005
e-mail: service@amfreece.cz ; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
D - MACHINE ADJUSTMENT
5. CHANGE OF THE BUTTONHOLE SHAPE - CHANGE OF THE LATERAL
CAM
Machines S 100 - 0 3 0, S 100 - 031 and S 100 - 032
Fly bar
1. Loosen the screw .
2. Lift the roll stud , so that the locking lever allows the insertion of new lateral cam .
3. Tighten the screw
No bar - to adjust the fly bar with open end of the buttonhole, follow this steps:
1. Loosen the screw .
2. Push the roll stud and insert the cam.
3. Tighten the screw .
.
fly bar no bar
Machines 052/053/033/035/036- unscrew the screw on the lateral cam, remove the cam, insert
the new one and tighten the screw.
Machine 060- Remove the cam and insert the new one. To sew fly bar or no bar buttonhole, instead of
cross bar - follow the section G 5, G6.