Service manual

S100
1-23
Revised 10/2005
e-mail: [e-mail] ; [e-mail] ; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
D - MACHINE ADJUSTMENT
4. LENGTHS OF THE SEWING
The mechanism is not used for machine S 100 - 052 and S 100 - 053.
1. Loosen the clamp screw  and move with the rod till , so that the needed sewing length on the
dial rod  is covered with the indicator mark .
2. Tighten the screw .
The total length of the sewing L was just adjusted - see picture.
Note: The total sewing length is the sum of the: length of cutting plus the length of the bar.
If the fly bar sewing is needed, it is necessary to change the length of the shape cam.
WARNING ! When the length of buttonhole is changed, it is necessary to change also the cutting steel
with appropriate length.
✑ ✑ ✒✑ ✑ ✒
✑ ✑ ✒✑ ✑ ✒
✑ ✑ ✒
✒✒
✒✒
✒



