Service manual

1-14
S100
Revised 10/2005
e-mail: [e-mail] ; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
B - MACHINE INSTALLATION
6. THREAD STAND INSTALLATION
1 . Put the thread stand together
according to the drawing.
2 . Position of the locking ring 
allows assembly of the thread stand
for various thickness of the table
top. Threaded end of the post 
must not extend more that 1 mm
(1/32) through the locking nut .
3 . Adjust the ring , insert the washer
 and the post into the hole
provided in the right rear of the
table top . Insert the washer 
and tighten the nut .