Service manual

EBS - MARK II
1-1Released:01/2013
E-mail: [e-mail]; webside: www.amfreece.com
Phone: [phone]; Fax: [phone]
A - INTRODUCTION
1. BASIC INFORMATION
Thank you for buying our electronic EBS Mark II. This sewing machine is intended for sewing
buttons on outwear. It has been designed and manufactured to be reliable and easy to
operate. Special attention has been paid to ensure ease, effectiveness and safety for machine
operators an servicemen.
Safety mechanisms protect both, operators and the machine, and respect valid safety and
hygiene provisions for usual technological usage of the machine. Those safety mechanisms
include electrical plug, operation switch (circuit breaker) and covers ensuring safety operation
of the machine only if they are fitted onto the machine correctly.
There are information labels on the machine to point out additional danger. Do not remove or
damage those labels. In case of damage, order a new one. Mentioned warnings cannot cover
all safety aspects and therefore it is very important for the operator to read this manual carefully
and understand it well before he/she starts operating the machine. It will also eliminate errors
during machine installation and its operation. Do not put the machine into operation unless
you have read all the manuals supplied with the machine and have understood each function
and procedure.
We recommend that servicemen from AMF Reece supervise the installation of the machine
and initial training of your mechanics and operators. The most effective method ensuring
safety of operators working on the machine is a strict safety program including instructions
for safety operation. Operators and servicemen should wear safety glasses.