Service manual

EBS - MARK II
1-66
F - MAINTENANCE
Released:01/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
WARNING!
Check the condition of the electric wires if they are not damaged.
Check if the protective covers are not damaged. Replace the damaged covers by new
ones.
Never put your fingers into the area of the sewing needle.
Do not modify the machine in a way that can shut off its safety elements.
CAUTION!
Do not fail to carry out regular maintenance works.
Clean the needle bars on a regular basis.
Do not damage, modify or remove the safety labels.
Do not operate the machine if you are intoxicated.
Ensure the lightening of the working area of at least 750 luxes.
1. CLEANING AND MAINTENANCE OF THE MACHINE
1.1. Shut off power supply and the air inlet.
1.2. If you want to carry out cleaning and greasing, lift up the cover of the upper looper
. By
pressing the stud and securing the cover by latch . You can turn the sewing mecha-
nism by rotating the handwheel.
CAUTION!
In this position of the cover the threading hook is without the cover - have this in mind
because it can cause injuries.
1.3. Clean the fabric leftovers from the sewing area.