Service manual

EBS - MARK II
1-53
Released:01/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
E - STANDARD MACHINE
2.5. EYE GUARD ADJUSTMENT
Close the eye - guard (from the valve test screen
and adjust it to be parallel with the top looper cover .
2.6. THREAD TRIMMING ADJUSTMENT
Adjust the thread trimming using the nut
in the way the knife fully uncovers
the hole while open and close the hole
and reliably trims the thread while closed.
2.7. 5-THREAD DRAW-OFF SYSTEM
Right adjustment of the draw off system keep the thread
in one line - use the nut .
2.8. THREAD BRAKE ADJUSTMENT
Adjust the thread brake
so that it clamps all 5 threads
equally. Use screws and excentric screw .