Service manual

EBS - MARK II
1-46
Released:01/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
E - STANDARD MACHINE
1.6. JOGGING
Jogging function enables the user to monitor the button sewing process and check all set
parameters. Jogging function is protected by password level II, see chapter E 1.2.1.
CAUTION!
Before using jogging function, please make sure, button is loaded in the chuck and
machine is in position ready for sewing. This means the green start button is on, see
section C for details.
1.6.1. JOGGING SCREEN DESCRIPTION
a) Press icon
on the service menu screen to enter the jogging screen. Press icon to ac-
tivate/deactivate the jogging function. Jogging function activated:
, jogging function
deactivated: . In case the jogging function is activated, machine can perform jogging
in small or big steps switch are set in degrees by using icon (small step) or (big step).
b) To achieve jogging itself press icon (small step) or (big step). Current positions of
all motors are displayed in the middle of jogging screen, see point , together with the
information on current sewing phase .
c) During jogging it is possible to return to the main screen to adjust any sewing parameters.
The newly set parameters are effective immediately. There are also the small
and big
step icons replicated on several sewing parameter adjustment screens to simplify the
button sewing adjustment during jogging (refer to chapter D 2).
d) For a better accessibility of the sewing area, icons
and can be used.