Service manual

EBS - MARK II
1-44
Released:01/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
E - STANDARD MACHINE
1.5. MACHINE PARAMETERS
The machine parameter screen enables selection of display language, activation of automatic
functions together with their timing, adjusting the button feeding speed, and selection of
machine accessories. To enter the basic parameters screen, press icon
on the service
menu screen.
a) Icons in point
are used to select a required display language (English, Czech, or Italian)
especially used on the error description screen.
b) Icon
is used to activate/deactivate the automatic threading system. In case icon is
activated threading device is controlled by pedal. In case icon is not activated threading
device has to be handled manually.
c) Icon
is used to activate/deactivate automatic button feeding. In case icon is activated
machine automatically loads another button every time the sewing cycle is finished.
d) Icon
is used to activate/deactivate automatic closing of the auxilliary fabric holder. In
case icon is activated the auxilliary fabric holder is closed automatically and it is neces-
sary to set delay time of the auxilliary fabric holder activation by icons
. This delay is a
time from closing the tongue till closing the auxilliary fabric holder. In case icon is not
activated fabric holder is controlled by pedal.
e) Icon
is used to activate/deactivate the thread draw-off system. Thread draw-off system
may be deactivated for threads which can be easily pulled from the bobbin.
f) Icon
is used to activate/deactivate the thread trimming system. Trimming may be deac-
tivated in case of the manual trimming requirement.
g) Icon
is used to activate/deactivate automatic servo home positioning. In case icon is
activated the servo is brought to its home position every time the home position icon
on the main screen is pressed. In case icon is not activated servo has to be
brought to its home position manually by using the hand wheel on the machine head - this
can be used in case of enhanced safety requirements.