Service manual

EBS - MARK II
1-34
D - MACHINE CONTROLS
Released:01/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
2.6. STITCH STYLE ADJUSTMENT (SHOW, BLIND, STANDARD STITCH)
Press icon on the main screen to enter stitch style screen. You can set the following pa-
rameters:
a) Press icon
, , or to select the stitching style - all blind stitches (stitches inside
the garment), 1 or 2 show stitches, all show stitches.
b) Depending on the previous selection, appropriate icons of stitch depth
, are dis-
played. Use icons
to set stitch depth of blind stitch within range 0-3 mm from garment
facing. Press icon to set stitch depth for show stitch within the range 0-3 mm – this
depth is set as an increment of the blind stitch depth.
Icons in section
only appear if password level II is submitted (refer to chapter E 1.2.1.).
2.7. LOCKING STITCH ADJUSTMENT
Press icon
on the main screen to enter locking stitch adjustment screen. You can set the
following parameters:
a) Use icons
to set number of initial locking stitches sewn to fabric before button attaching.
The stitches number range is 0-3 stitches.
b) Use icons
to set number of final locking stitches sewn trough the wrapped button neck
in case of buttons with holes. In case of shank buttons the final locking stitches are sewn
to the fabric as the initial locking stitches. The stitches number range is 0-6 stitches.