Service manual

EBS - MARK II
1-12
cca 450 mm
Released:01/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
B - MACHINE INSTALLATION
3. LOWER - LEVEL DESK ASSEMBLY
3.1. Attach the lower - level desk to the tubes
of the machine frame and push forward
as desired.
3.2. Press the emergency stop button and check
fully a free movement of the bedplate!
3.3. When the desired position is reached, tight-
en the screws
for fixing the workspace.
4. THREAD STAND INSTALLATION
4.1. Attach the thread stand with its accesso-
ries according to the figure.
4.2. The appropriate position when tightening its
clamps is on the back side of the stand
app.450 mm from left.