Service manual

EBS - MARK II
1-8
2009 M 710 015
Released:01/2013
E-mail: [e-mail]; webside: www.amfreece.com
Phone: [phone]; Fax: [phone]
A - INTRODUCTION
7. COLOURED MARKING
8. INFORMATION NECESSARY FOR A CLAIM
8.1. In case of a claim communi-
cate the data from the serial
number plate – serial number
and the year of production.
8.2. Describe the defect, enclose
with a photo whenever appli-
cable.
CE standard
confirmation
Year of
production
Serial number
Denotation of 1-phase
electromotor / param-
eters of the power sup-
ply grid
Electromo-
tor nominal
power
Electromotor
nominal cur-
rent
SCREW TOP
LINKS
YELLOW
MARKS
1. Loosing and following disassembly of this link causes distincive
intervention to the mechanism adjustment, was done when
assembled and sewed off at the factory.
2. After such an intervention to the mechanism, new adjustment
completely checked as well.
BLUE MARKS
Screws and nuts are secured against loosening with glue "LOCTITE"
LUBRICATION
LOCATIONS
RED MARKS
CAUTION!
Lubrication regime adherance is necessary for protection of the
reliable long-term machine operation.