Service manual

,)
WARRANTY FLAT-RATE LABOR SCHEDULE
1. Remove and replace chain case cover ................................................ .
1/4 hour
2. Remove and replace chain and adjust tension ..•............................... _ .•.•.
1/4 hour
3. Remove and replace driven clutch or bearings or V -belt ....................... . 1/2 hour
4. Remove and replace drive clutch ....................................................... .
1/2 hour
5. Remove and replace engine mount and/or strap (MARK IV) .................... . 1 hour
RemoVe and replace engine mount and/or strap (MARK V) .................... .. 1-1/2 hours
6. Remove and replace drive sprockets, drive shaft or bearings ................. . 1 hour
7. Remove and replace traction belt (endless) and adjust .......................... . 2 hours
8. Remove and replace rear idler shaft assembly or bearings .................. .. 1/2 hour
9. Remove and replace rear support arms (2) ......................................... . 1/2 hour
10. Remove and replace throttle cable .................................................... . 1/4 hour
11. Remove and replace brake cable ...................................................... .. 1/4 hour
12. Remove and replace bogie support half (lor both) ............................... .
1/2 hour
13. Remove and replace bogie wheel ...................................................... .. 1/4 hour
14. Remove and replace steering spindle ................................................. ..
15. Remove and replace spindle arm ....................................................... .
1/4 hour
)
1/4 hour
16. Remove and replace carburetor ....................................................... .. 3/4 hour
1002472