Service manual

r""-
~
GUARANTEE FLAT-RATE LABOR SCHEDULE
Models
MARK IV (SD15Pl0A)
MARK V (SD18E20A)
1. Remove and replace chain case cover
2. Remove and replace chain and adjust tension
3. Remove and replace driven clutch or bearings or V -b elt •..............•....•.•.....•....
4. Remove and replace drive clutch
5.
6.
7.
8.
9.
10.
11.
12.
Remove and replace engine mount and/or strap ............................................ .
Remove and replace engine mount and/or strap ............................................ .
Remove and replace drive sprockets, drive shaft or bearings .......................... .
Remove and replace traction belt (endless) and adjust ................ .. ............. . .
Remove and replace rear idler shaft assembly or bearings .................. . .......... .
Remove and replace rear support arms (2) .................................................. .
Remove and replace throttle cable
Remove and replace brake cable
Remove and replace bogie support half (lor both)
1/4 hour
1/4 hour
1/2 hour
1/2 hour
1 hour (Mk IV)
2
hours (Mk V)
1 hour
2 hours
1/2 hour
1/2 hour
1/4 hour
1/4 hour
1/2 hour
13.
Remove and replace bogie wheel ................................................................. 1/4 hour
14. Remove and replace steering spindle
1/4 hour
15. Remove and replace spindle arm ............................•.............................. ...... 1/4 hour
16. Remove and replace carburetor ............ .... ... . ... .•........ .... ...... ......... ... .... .. .. ... 3/4 hour
1